Switch1priority15

This will set the priority for the stack election. If you want a particular switch to be the master switch in the stack you would set the priority higher ...

Change the priority value of the switch to be added to a value greater than the highest priority of the stack. Highest being 15. switch priority.

2015年11月12日 — Switch 3 Provision WS-C2960XR-48FPS-i. 2. Set priority of the new master to 15 (highest priority). Switch 1 priority 15. 3. Load that backup ...

2014年6月3日 — ... Priority。 進入configure mode，選擇要調整為Master 設備之Priority 為15。 備註：Priority 範圍為1~15，值越大為Master。 switch # conf t. switch ...

2016年7月14日 — Example of switch set to high priority 15 for management unit: C5 Stack(su)->show switch 1 Switch 1 Management Status Management Switch ...

2022年5月31日 — A priority of 15 sets the switch to the 'Active' role, a priority of 14 sets the switch to the 'Standby' role, and a priority of 13 sets the ...

The priority value can be 1 to 15. The default priority value is 1. If priority ... switch 1 priority 15. switch 2 priority 14. switch 3 priority 13. Example ...

And the priorities range from 15 to 1, 15 being the switch that will be elected master every time assuming it is booting at the same time as the rest of the ...

The priority value can be 1 to 15. The default priority value is 1. User can display the stack member priority value with the show switch user EXEC mode command ...